Hydrophilic PTFE Filter Cartridge
◆Hydrophilic PTFE membrane suit for liquid sterile filtration, no prewetting
◆High filtration efficiency, ≥99.99%, long service life
◆Uniform pore-size distribution allow high low rate
◆Superior chemical compatibility, ideal for strong alkali and acids, resistant to high temperature, ozone
◆Low extractable levels, no fiber releasing
◆Replace Sartorius ,Pall or Millipore Filter is available
•Mineral water, purified water, ozone, strong oxidizing liquid filtration
•High temperature liquids filtration
•Strong alkali, acids, corrosive liquids filtration
Table : Typical water flow rate (10")
| Materials Of Construction | Filter Media: | Hydrophilic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65,1.0, 3.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75'') | ||||
| Inner Diameter | 33mm(1.30'') | |||||
| Length(based on DOE end caps) | 10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10'' | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10" | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H - Chemical | IHPF | 010-0.1um | AA- DOE | 10-10" | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2um | CN-226/FIN | 20-20" | E-epdm ; T-teflon (encaptulated) | ||
| P - Phamar | 045-0.45um | BN-222/FIN | 30-30" | V-viton | ||
| F - Food | BF-222/ FLAT SEAL | 40-40" | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5" | Pharmaceutical grade; Micron:0.45um; Length:10" ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIHPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Write your message here and send it to us
